Tel. +49 89 95441613 - Click here for our Munich shop website

Ortofon MC Quintet Mono
Ortofon MC Quintet Mono
Ortofon MC Quintet Mono
Ortofon MC Quintet Mono
Ortofon MC Quintet Mono
  • Load image into Gallery viewer, Ortofon MC Quintet Mono
  • Load image into Gallery viewer, Ortofon MC Quintet Mono
  • Load image into Gallery viewer, Ortofon MC Quintet Mono
  • Load image into Gallery viewer, Ortofon MC Quintet Mono
  • Load image into Gallery viewer, Ortofon MC Quintet Mono

Ortofon MC Quintet Mono

Regular price
€450,00
Sale price
€450,00
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

Output voltage at 1 kHz 5 cm/sec - 0.3 mV
Frequency response 20 Hz - 20 kHz - +/-2.0 dB
Tracking ability at 315 Hz at recommended tracking force *) - 70 μm
Compliance, dynamic, lateral - 15 μm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 μm
Tracking force range - 2.1-2.5 g (21-25 mN)
Tracking force recommended - 2.3 g (23 mN)
Tracking angle - 20º
Internal impedance, DC resistance - 5 Ohm
Recommended load impedance - >20 Ohm
Cartridge body material - ABS/Aluminium
Coil wire material - Pure 4-nines silver/Ag
Cartridge colour - White
Cartridge weight - 9 g

*) Typical value

 

Compatibility with Rega brand TT/TA: 
REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Please read about cartridge set-up and alignment on tonearm on our FAQ
Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tonearm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and your tonearm is ready to play.
2 - 3 mm spacers should be enough for Quintet cartridge. 

 

A True Mono from Ortofon
It features a Nude Elliptical r/R 8/18µm stylus that is a good solution for playing mono microgroove vinyl records. The Quintet Mono will track perfectly through even worn and damaged records and ensure the surface noise control.

Quintet Mono uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.

MC Quintet Mono is for playing mono microgroove vinyl records. Read more about Ortofon True Mono cartridges range ».

The ST-7 transformer will be a perfect match for the MC Quintet Mono cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series.